gaqdg.blogg.se

Rangkaian sirine polisi
Rangkaian sirine polisi










rangkaian sirine polisi

the current supply can be seen in the datasheet, which is about 10-15mA. Di samping adalah skema rangkaian sirine polisi dengan menggunakan 2 IC yang suaranya sangat memuaskan silahkan di coba semoga berhasil. Apa itu suara ultrasonik yaitu adalah suara dengan frekuensi lebih dari 20 kHz. Cara kerja rangkaian pengusir nyamuk ini adalah dengan memanfaatkan suara dari ultrasonik / ultrasound. Usually will work optimally if given a 5-15V. Misalnya saja di artikel sebelumnya ada juga rangkaian sirine polisi dengan menggunakan IC 555 juga.

  • vcc, pin it to receive a DC voltage supply.
  • Switching transistor serves to clamp the corresponding node to ground on the timing of certain
  • discharge, this pin is connected to an open collector transistor Q1 is connected to ground emitternya.
  • threshold, this pin is connected to the positive input (comparator A) which will reset the RS flip-flop when the voltage on the capacitor from exceeding 2 / 3 Vc.
  • This pin can be left hanging, but to ensure the stability of the reference comparator A, usually associated with a capacitor of about 10nF to berorde pin groun
  • control voltage, this pin serves to regulate the stability of the reference voltage negative input (comparator A).
  • rangkaian sirine polisi

    Normally this pin is connected directly to Vcc to prevent reset This pin is connected to a PNP-type transistor gate, so the transistor will be active if given a logic low.

  • reset, the pin that serves to reset the latch inside the IC to be influential to reset the IC work.
  • trigger, negative input from the lower comparators (comparator B) that maintain oscillation capacitor voltage in the lowest 1 / 3 Vcc and set RS flip-flop.
  • Ground, is the input pin of the source of the negative DC voltage.











  • Rangkaian sirine polisi